SAFL Channel Plots

Here are the plots of each of the color channels:

We increased the contrast of these images to bring out any lateral variations:

Excuse the choppiness, that will not be in the final version.

As you can see, most of the lateral noise is in the red channel. That would make sense, because if the noise was caused by a varying amount of water, the most change would be in the red channel.
The most change seems to be in the Red Channel. Thus, we will use a vertical AGC on the red channel, and leave the blue and green untouched. Stay tuned.
One way to do that is to use the blue channel as the red channel, and recombine the images.
Here is an average of the red, green, and blue channels:

Here is an average of the green, and blue channels, leaving out the red:

Excuse the choppiness, that will not be in the final version.
Here is an average of the green, and blue channels, leaving out the red, normalized:

Excuse the choppiness, that will not be in the final version.
For a log of the work so far, see HERE.
Send suggestions to:

Wm P. Kamp